Dixie Belle Patina Collection

Dixie Belle Patina Collection

19.00

Create REAL Rust and Patina with our Patina Paints!

AFTER ONE COAT OF DIXIE BELLE PAINT, APPLY ONE COAT OF PATINA PAINT, LET DRY.

APPLY SECOND COAT OF PATINA PAINT AND WHILE STILL WET, APPLY PATINA SPRAY.

SIT BACK AND ENJOY THE MAGIC!!

Patina Paint incorporates real metal and naturally reacts as the patina spray is applied

Patina Paint & Patina Spray

Step 1: Clean surface with White Lightning or warm soap and water, then rinse.

Step 2: Base Coat​

• If surface is anything other than metal, apply a coat of Dixie Belle Paint, let dry 

• If surface is metal, apply a coat of Prime Start.

Prime Start contains an acid blocker to stop the rust/patina from “eating” through the Patina Paint and degrading the metal.

Step 3: Apply Patina Paint

• SHAKE WELL! Patina Paint is chock full of ground metal, which will sink to the bottom. Shaking is a MUST!

• Using your brush of choice, apply one coat of Patina Paint, let dry. The initial coat will be thin, that’s OK, don’t panic J

• Once the first coat is dry, apply a second coat of Patina Paint

Step 4: Apply Patina Spray

• While 2nd coat of Patina Paint is STILL WET, spray a misting of Patina Spray

• Sit back and watch the magic!! It can take 2-6 hours to reach full effect.

No sealing necessary. Sometime surfaces will have that “chalky” feel and the patina rubs off. To stop this, after everything completely dry, run a damp rag over the surface and let dry.

Patina Paint & Patina Spray

Step 1: Clean surface with White Lightning or warm soap and water, then rinse.

Step 2: Base Coat​

• If surface is anything other than metal, apply a coat of Dixie Belle Paint, let dry 

• If surface is metal, apply a coat of Prime Start.

Prime Start contains an acid blocker to stop the rust/patina from “eating” through the Patina Paint and degrading the metal.

Step 3: Apply Patina Paint

• SHAKE WELL! Patina Paint is chock full of ground metal, which will sink to the bottom. Shaking is a MUST!

• Using your brush of choice, apply one coat of Patina Paint, let dry. The initial coat will be thin, that’s OK, don’t panic J

• Once the first coat is dry, apply a second coat of Patina Paint

Step 4: Apply Patina Spray

• While 2nd coat of Patina Paint is STILL WET, spray a misting of Patina Spray

• Sit back and watch the magic!! It can take 2-6 hours to reach full effect.

No sealing necessary. Sometime surfaces will have that “chalky” feel and the patina rubs off. To stop this, after everything completely dry, run a damp rag over the surface and let dry.

Color:
Size:
Quantity:
Add To Cart